Bootstrap Example

AK7 - 3G Vehicle Tracking Device

Price Including GST

The SAK7 is our most popular 3G Tracking Device. This device is used to track cars, trucks, boats, caravans, equipment and more. It is a basic 3 wire installation (power, earth, ignition sense).

Network: 3g
Size: 80 x 48 x 26mm
Weight: 63g
On Board Memory, Point Logging: 2MB
Backup Battery: 650mAh
Operating Voltage: 9 ~ 40V
Low Power Mode: Available
Tracking Resolution: 300m/15°
GPS Antenna: External
Cell Antenna: Internal
Remote Disable: Yes


AX9 - 3G OBD2 Vehicle Tracking Device

Price Including GST

The AX9 is our most popular 3G OBD2 Vehicle Tracking Device, with similar functionality to the AX7 but designed for DIY installation, simply plug this device into your vehicle OBD2 port and start tracking.

Network: 3g
Size: 50 x 46 x 25mm
Weight: 50g
Waterproof: No
On Board Memory, Point Logging: 8MB
Backup Battery: 650mAh
Operating Voltage: 8 ~ 36V
CanBus: Yes
Installation: OBD2 Plug
Low Power Mode: Available
Tracking Resolution: 300m/15°
GPS Antenna: Internal
Cell Antenna: Internal
Panic / duress: No
Ignition State Sensor: Yes


Driver ID - SAK7

Price Including GST

Driver ID allow you real time information on your drivers currently in control of each vehicle. Pull reports based on where vehicles have been and who was driving. Price Including GST

 


Satellite Tracker - Smart One

Price Including GST

The Globalstar SmartOne LP (line-powered) is designed for the intelligent management of powered and non- powered fixed and mobile assets. It is a practical solution for tracking asset location, reporting unauthorized movement, engine runtime reporting and major fault monitoring as well as a multitude of other applications. Users can track intermediate bulk containers, vehicles and boats as a solution to improve your assets operating efficiency and security.

The SmartOne LP can be line-powered (operates on external power) or in the absence, interruption or failure of line-power, the SmartOne LP will automatically switch to battery back-up to ensure transmissions continue. When using line- power, the user has maximum flexibility in messaging frequency allowing for regular monitoring of asset location. In battery mode  the SmartOne LP is powered by 4 “off-the-shelf” AA 1.5V lithium batteries providing 3+ years of battery life.

The SmartOne LP utilizes motion sensors, comparative GPS positions and custom configured sensors to gather and transmit asset status information. Each SmartOne LP is configured to track its asset’s specific needs and provide intermediate and emergency alerts by email or text (VAR software integration required).

Key Features

  • Total packaged solution requires no harnesses, no external power and no external antenna
  • Change of location sensing sends alerts if asset moves outside of pre-determined range
  • Messaging cost reduction mode: reduced satellite messaging if asset remains in same location
  • Run time monitoring
  • Hardware on/off feature allows the unit to initiate GPS re-centering functionality
  • Accepts serial signals from device sensors
  • Quick installation using either industrial adhesives or screw mounts
  • Operates on external line power from 10 to 48 volts DC

Temperature Probe - SAK7

Price Including GST

The temperature probe allows real time refrigeration monitoring with real time alerts when it goes outside of your preset temperature range.


Satellite Tracker - Smart One C

Price Including GST

SmartOne C is a satellite-managed asset-ready tracker, designed for the intelligent management of fixed and mobile assets.

The SmartOne C is a practical solution for a multitude of options including:

  • Up to 12 different reporting times
  • Interval or 24 hour operation mode
  • Alternate reporting schedules
  • Low battery message

Use the SmartOne C to track intermediate bulk containers, vehicles and boats as a solution to improve your assets operating efficiency and security.

The device can be line-powered, or in the absence or interruption of external power, the SmartOne C will automatically switch to battery back-up. When using line-power, the user has maximum flexibility in messaging frequency allowing for regular monitoring of asset location.

The SmartOne C utilizes motion sensors, comparative GPS positions and custom configured sensors to gather and transmit asset status information. Each SmartOne C is configured to track its asset's specific needs and provide intermediate and emergency alerts by email or text (VAR software integration required).

Key Features

  • Quick installation: Use industrial adhesives, brackets or screw mounts for installation
  • Operates on 5v external line power, 8-22v regulator cable, or (4) AAA Lithium Batteries
  • Automatic alerts: Change of location sensing sends alerts if asset moves outside of pre-determined range
  • Messaging reduction mode: Reduces satellite messaging if asset remains in same location for a pre-determined period of time
  • Hardware on/off feature: Allows the unit to initiate GPS re-centering functionality
  • Accepts serial signals (TTL) from external inputs